Benchtop Ovens and Lab Ovens

 

Benchtop ovens and lab ovens are small in size but big in features.

Benchtop ovens and lab ovens offer a small footprint where space is limited and processes that deal with small batch loads.

Model LBB Benchtop Oven

 

  •     Max temp: 400°F (204°C)
  •     Sizes in cu ft: 2, 7
  •     High limit control
  •     Optional pass through doors
  •     304 stainless steel interior
  •     Digital controller

Model LAC Benchtop Oven

Advanced controller

 

  •     Max temp: 500°F (260°C)
  •     Four sizes: 3.7 to 18 cu ft (105 to 510 liter)
  •     High limit control
  •     End of cycle indicator
  •     304 stainless steel interior
  •     Microprocessor controlled

Model RAD/RFD Benchtop Oven

specifically designed to meet NFPA 86 requirements for applications that include flammable solvents or large amounts of moisture removal.

ideal for small and R&D Class A applications.

 

  •     Max temp: 650°F (343°C)
  •     Size from 4.2 to 35 cu. ft. (119 to 991 liters)
  •     End of cycle high limit control
  •     RFD: Class A (NFPA 86)
  •     304 stainless steel interior
  •     Microprocessor controlled

Model LFC Class A Benchtop Oven

High performance laboratory oven for

use with flammable solvents

 

  •     Max temp: 500°F (260°C)
  •     Sizes in cubic feet: 4 (105 and 340 liter)
  •     Class A (NFPA 86) for flammable solvents
  •     High limit control
  •     Microprocessor controlled

Model RAF/RFF Benchtop Furnace

specifically designed to meet NFPA 86 requirements for applications that include flammable solvents.

 

  •     Max temp:1000°F(538°C)
  •     Size in cubic feet: 4
  •     High limit control & alarm
  •     RFF: Class A (NFPA 86)
  •     304 stainless steel interior
  •     Microprocessor controlled

Model LCC/LCD Laboratory Oven

Highest standards in HEPA filtration.

Re-circulated airflow is 100% HEPA filtered.

 

  •     Max temp: 662°F (350°C)
  •     Sizes in cu ft: 1.6, 5
  •     HEPA filtered:ISO Class5
  •     Inert or Air Atmosphere
  •     Stainless steel inside & out
  •     Microprocessor controlled

Model Qmax Benchtop Test Oven

specifically designed to meet the frequent air changes and tight temperature uniformity required of the ASTM 5423 Type I & Type II oven specification.

 

  •     Max temp: 650°F (343°C)
  •     Size in cu ft: 4.2
  •     Meets ASTM 5423 Type I and II specification
  •     Rear access port
  •     Microprocessor controlled

RBC Lab Burn-in Oven

maximum flexibility for small lot qualification testing, burn-in, reliability testing, and research and development.

  •     Max temp: 662°F (350°C)
  •     Size in cubic feet: 5
  •     High dissipation capacity
  •     MIL STD 883D uniformity
  •     Stainless steel interior
  •     Inert or air atmosphere

Custom Splicing Oven for Carbon Fiber Manufacturing

 

High performance LAC benchtop industrial oven to create a custom splicing oven for carbon fiber production.

Carbon fiber manufacturers can use the oven to splice fiber strands together to keep fiber running continuously through the production line.

 

Despatch made several modifications to the base LAC oven to create the custom splicing oven.

Slots were added to the back of the oven with silicon curtains that seal around the product and reduce heat loss.

 Angled ledges around the door provide a stable place to set custom interior shelves.

The oven has increased heater capacity to ramp up to temperature faster and efficiently maintain the set temperature.

The addition of an electronic cooling fan filter protects the electrical panel from dust and debris.

Despatch also equipped the modified LAC with an easy-to-use, digital single set-point temperature control and high limit.

LCC Class A Pharmaceutical Oven

 

a custom LCC benchtop oven for a pharmaceutical company that needed an ISO Class 5 (Class 100) clean room oven that would meet NFPA requirements for drying medical products containing flammable solvents (acetone). The custom LCC was configured for Class A environments with the controls repositioned on the side of the oven. The front of the oven was attached to an isolation barrier to allow both the load and unload areas to be located in clean room environments.

Lab oven for universal use

 

Whatever you want to perform: material tests, ageing of computer chips, run complex experiments with highly sensitive loads, drying or tempering electronic components, hardening plastic resin or heating plasticine. universal heating oven / drying oven stands for unparalleled precise, even and gentle temperature control.

 

  • Temperature range up to +300 °C
  •  9 model sizes (32 to 1060 litres volume)
  •  2 model variants: SingleDISPLAY and TwinDISPLAY
  •  Natural convection or forced air circulation N/F

 

 

Specific use in accordance with the German MPG (Law on Medical Devices)

 

In accordance with the German Law on Medical Products (Directive 93/42/EEC), the UF/UFplus heating oven /drying oven can be used to heat up non-sterile clothes and covers.

 

A  heating oven/drying oven offers unique advantages

 

  •  intuitive and easy-to-use operating menu
  •  air exchange rates and air flap position electronically controllable
  •  temperature and air exchange ramps programmable via AtmoControl software (models with TwinDISPLAY)
  •  pre-heated fresh air prevents temperature fluctuations
  •  almost exclusive use of high-quality, corrosion-resistant and easily cleanable stainless steel for the working chamber and housing
  •  heating concept specifically adapted for a precise and homogenous temperature control
  •  a wide range of options for programming and documentation using interfaces, integrated data logger and Software AtmoCONTROL

 

 

Contact us for more details

SCORP Corporation

26 Ideal buildings Opposite Arab Contractors Stadium  Nasr City  11471 Cairo Egypt

Tel: 02-234 20316

Mobile: 0122732 6599

Fax: 02-234 20316

Commercial registration no. 368557

Labs@labs-supply.com

+201227326599